Warning: This module may not support sharing across sites

You are attempting to add a reference to this module that exists on another site in this group. This module may or may not support sharing across multiple sites - it doesn't explicitly state either way whether it does.

If you are sure that it does, or if your intent is to test its ability to do so, then proceed with caution and be aware that certain functionality in the module - or even the entire module - may not function correctly in this configuration.

If you are confused by this message or are working on a site that cannot tolerate any breakage, you should click Cancel and contact the DotNetNuke Support Team.

page shadow

Standards Relevant to Vehicle Electrification

Standards Relevant to Vehicle Electrification

The GTA Vehicle Electrification Council has compiled a list of standards as identified by the following entities:

Society of Automotive Engineers International (SAE):

  • J1654, High Voltage Primary Cable
  • J1673, High Voltage Automotive Wiring Assembly Design
  • J1715, Electric Vehicle Terminology
  • J1742, Connections for high voltage on-board road vehicle electrical wiring harnesses
  • J1766, Recommended Practice for Electric and Hybrid Electric Vehicle Battery Systems Crash Integrity Testing
  • J1772, Electric Vehicle Conductive Coupling
  • J1773, Electric Vehicle Inductive Coupling
  • J1797, Packaging of Electric Vehicle Battery Modules
  • J1798, Electric Vehicle Battery Performance Integrity Testing
  • J1908, Electrical Grounding Practice
  • J2183, 60 V and 600 V Single Core Cables
  • J2232, Vehicle System Voltage~Initial Recommendations
  • J2344, Guidelines for Electric Vehicle Safety
  • J2464, Electric Vehicle Battery Abuse Testing
  • J2574, Fuel Cell Vehicle Terminology
  • J2910, Design and test of hybrid electric trucks and buses for electrical safety (Draft)

International Organization for Standardization (ISO):

  • ISO 6469-1, Electric road vehicles - Safety specifications - Part 1: On-board electrical energy storage
  • ISO 6469-2, Electric road vehicles -- Safety specifications -- Part 2: Functional safety means and protection against failures
  • ISO 6469-3, Electric road vehicles -- Safety specifications -- Part 3: Protection of persons against electric hazards
  • ISO 16750, Environmental conditions and testing for electrical and electronic equipment
  • ISO 20653, Road vehicles -- Degrees of protection (IP-Code) -- Protection of electrical equipment against foreign objects, water and access
  • ISO 26262, Road Vehicles – Functional Safety
  • ISO 60529, Degrees of protection provided by enclosures (IP Code) CONSOLIDATED EDITION
  • IEC 60664-1, Insulation Coordination for Equipment Within Low-Voltage Systems


  • UL 1248, Engine Generator Assemblies for Use in Recreational Vehicles
  • UL 458, Power Converters and Power Converter / Inverter Systems for Land Vehicles and Marine Crafts.
  • UL 1112, Standard for Safety for Marine Electric Motors and Generators (Cranking, outdrive, tilt, trim tab, generators, alternators)
  • UL 2202, Electric Vehicle (EV) Charging System Equipment

Technology and Maintenance Council (TMC):

  • RP160, Wiring and circuit protection guidelines for 12V DC and 120Volt AC in cab inverter systems

American National Standards Institute (ANSI):

  • ANSI/IEEE C2-2007, National Electrical Safety Code
  • ANSI/UL 2202, Standard for Safety for Electric Vehicle. (EV) Charging System Equipment

National Fire Protection Association (NFPA):

  • NFPA 70, The National Electric Code, Article 551
  • NFPA 1192, Standard on Recreational Vehicles
  • NFPA 1901, Standard for Automotive Fire Apparatus


  • Daimler, LV 123, Electrical characteristics and electrical safety of high voltage components in road vehicles - Requirements and tests