Warning: This module may not support sharing across sites


You are attempting to add a reference to this module that exists on another site in this group. This module may or may not support sharing across multiple sites - it doesn't explicitly state either way whether it does.

If you are sure that it does, or if your intent is to test its ability to do so, then proceed with caution and be aware that certain functionality in the module - or even the entire module - may not function correctly in this configuration.

If you are confused by this message or are working on a site that cannot tolerate any breakage, you should click Cancel and contact the DotNetNuke Support Team.


page shadow

Industry & Member News

Ford Sells 500,000th EcoBoost Engine for F-150 as Customer Preference Shifts to V6 Engines

Ford Sells 500,000th EcoBoost Engine for F-150 as Customer Preference Shifts to V6 Engines

5/7/14

Ford marks a major milestone with the sale of its 500,000th 3.5-liter V6 EcoBoost®-equipped F-150.

Just more than three years after its introduction, popularity of Ford’s 3.5-liter EcoBoost engine continues to grow among F-150 customers as its cumulative fuel savings continue to increase.

In the past 38 months, F-150 EcoBoost owners collectively have saved an estimated 56.8 million gallons of gas on an annual basis. According to the U.S. Environmental Protection Agency, that’s equal to:

  • The annual greenhouse gas impact of 413,895 acres of U.S. forests
  • A city in which 70,000 homes going without electricity for a year
  • 6,685 tanker trucks’ worth of gasoline
  • Installing 139 wind turbines

For the fourth month in a row, more than 57 percent of retail sales of Ford F-150 light-duty trucks are powered by V6 engines – reversing 47 years of V8 engine dominance in the industry. More than 45 percent of these sales are trucks equipped with Ford’s 3.5-liter EcoBoost. 

Over the last three years, retail registrations of light-duty pickups powered by V6 engines grew more than 600 percent, with F-150 directly responsible for 91 percent of that growth, based on Ford analysis of Polk retail registration data.

“We expect those numbers to hold for the rest of the year,” said Doug Scott, marketing manager, Ford Truck Group. “It really is amazing when you consider we are doing that with just two V6 engine choices – the 3.5-liter EcoBoost and the 3.5-liter Ti-VCT engine. When we come out with the new 2015 F-150, we will offer three different V6 engines, so there is potential for further growth.”

The segment-exclusive technologies built into every EcoBoost engine, including turbocharging and direct fuel injection, are particularly relevant for truck customers. This combination of turbocharging and direct fuel injection delivers a wealth of low-end torque and maintains it across a broad rpm range, which is key in towing applications.

The 3.5-liter EcoBoost truck engine delivers 420 lb.-ft. of torque and 365 horsepower to enable  towing of up to 11,300 pounds – more than enough to tow a fully loaded, three-horse trailer or a large boat. Plus, this engine does it all on regular fuel and with outstanding fuel economy.

“Truck customers should think of the EcoBoost truck engine as a gas-powered engine with diesel-type capability and characteristics,” said Jim Mazuchowski, program manager, Ford V6 engines. “The twin turbochargers and direct injection give it the broad, flat torque curve that makes towing with a diesel so effortless and hard acceleration so much fun.”

In the last three years, no competitor has eclipsed a 20 percent take rate for V6 engines in half-ton trucks. It’s been a predominantly V8 crowd, until the introduction of the Ford EcoBoost V6.

“Today’s customer doesn’t hold to the old notion that a truck must be powered by a V8 engine,” Scott said. “Just five years ago, you would have had a hard time making a case for V6 truck engines. Not today. Now, it’s all about fuel effectiveness. Customers are looking for the best combination of city and highway mileage, horsepower, torque, towing capacity, payload and value, asking the key question, ‘What is the most productive, efficient package for the work I need to do?’.”

That efficiency a V6 engine delivers is starting to have a significant impact on the environment. By moving half a million F-150 customers out of V8s and into V6 engines, Ford has saved more than 56 million gallons of fuel – more than all of the fuel saved from every electric and plug-in electric car ever sold.*

That gap will only widen as time goes on, Scott said.

Along with the 3.5-liter Ti-VCT and 3.5-liter EcoBoost V6 engines, the all-new 2015 Ford F-150 will offer a new 2.7-liter EcoBoost engine with standard Auto Start-Stop, built in Lima, Ohio.

Production of EcoBoost is supported, in part, by Ford's green partnership with the U.S. Department of Energy. Ford has 11 facilities in the U.S., including retooling of Cleveland Engine Plant where EcoBoost is made, participating in the Advanced Technology Vehicles Manufacturing Loan Program. This green loan program helped to develop advanced technologies and strengthen American manufacturing across the country.

 

 

 

For more information regarding Ford and its products worldwide, visit http://corporate.ford.com.


Posted on Wednesday, May 07, 2014